Returns and credits
Check what can be returned, what cannot, and what to send with a claim. Use the contact form so support can assess the roll, the job and the press conditions.

When a return may be considered
Returns are handled case by case. In general, a roll can only be considered where the issue is linked to the supplied product and not to storage, handling, machine setup or the substrate used on press.
Before sending anything back, check whether the roll is still in usable condition. Support may ask for:
- the foil type and finish, for example metallic, pigment, holographic or security foil
- the roll width and remaining length
- the substrate used, such as coated board, labels, cartons, book covers, leather, plastics or textiles
- the press type used, such as platen, cylinder or roll-to-roll
If the issue is related to application setup, first review Technical help and Ordering Rolls.
What cannot be returned
Opened foil is not automatically returnable. A roll may not be suitable for return where it has been slit, partly used, marked, contaminated, damaged in storage or altered during make-ready.
Claims also cannot be assessed properly if the foil was run outside a sensible test window for the job. As a starting point, many jobs are tested in typical heat ranges around 90 to 140 degrees Celsius, but the right setting depends on the foil, the artwork, the die, the substrate and the press.
If the roll was used on soft-touch laminate, plastics or textured surfaces, include that detail. These applications often need different release behaviour, pressure and dwell than standard board work.
How to prepare a claim
To help support check the matter quickly, keep the original roll label and note the job details. Clear information makes it easier to decide whether a return or credit is appropriate.
- order reference if available
- foil product name or finish
- press type and die material, for example magnesium, copper or brass
- substrate and print area size
- temperature, dwell and pressure used
- what went wrong, such as poor release, dull finish, blocking, patchy adhesion or cracking
- photos of the foil, the stamped sample and any waste pieces
If you need samples or a swatch book first, go to sample requests.
Contact support through the form
Use the contact form when you want a return checked. Please include the product type, the roll width, the application and a short description of the fault. If possible, attach photos and a sample from the press run.
Also say whether the foil was used on labels, cartons, book covers, leather goods or another item, and mention any make-ready steps already tried. If the roll was part of a repeat order or a new setup, include that too.
Support may ask for more detail before advising next steps, especially where adhesion, release profile or surface finish is involved.
Next steps after review
Once the details are checked, support will advise whether the roll should be held for inspection, returned for review, or treated as a press setup issue. If the matter is linked to press conditions, the team may suggest a different foil grade, a changed temperature window, or a new die and make-ready approach.
For future orders, it helps to confirm the press format and the intended substrate before production starts. For reordering and planning, see Lead times and Account setup.
| Include | Why it helps |
|---|---|
| Foil finish and roll width | Confirms the exact product supplied |
| Press type and die material | Shows the setup used on press |
| Temperature, dwell and pressure | Helps isolate application variables |
| Photos and sample pieces | Lets support see the fault clearly |
What our Hot Stamping Foil customers say
Verified Google reviews
Also worth a look




Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
