Process blue
A cool blue finish for clean brand work on coated board, labels, cartons and covers. Test it on press and check the release and adhesion.

Process blue finish on press
Process blue gives an opaque blue look with a neat, even finish. It suits artwork that needs a cooler colour feel than metallic foil, while still standing out on a shelf or on a corporate folder.
It is a practical choice where blue has to read clearly on labels, cartons, book covers and presentation items. For a different blue tone or a paired metallic effect, compare it with Process red and the mirror finishes in the finishes library.
On the job, the appearance depends on the substrate, the die, the press condition and the surface energy of the stock. Start with test pulls before approving a run.
Where process blue suits
This finish works well on coated board, smooth paper stocks, soft-touch laminate and other surfaces that can hold a clean pigment transfer. It can also be used on some plastics and specialty substrates when the make-ready is set up carefully.
- Labels where a solid blue panel or logo is needed
- Cartons for brand panels, seals and decorative blocks
- Book covers for title marks and accent bands
- Presentation folders and corporate stationery
- Soft-touch laminate where adhesion and release need testing
If your stock is textured, heavily coated or unusually soft, ask for a sample and check whether a different pigment or a foil from Opaque white or Matte black pigment will suit the layout better.
Press checks for process blue
For pigment foils like this one, press set-up matters as much as the artwork. Check the temperature window, dwell time, pressure and release profile before going into production.
| Check | What to look at |
|---|---|
| Temperature | Start with a typical test range and adjust to the stock and press |
| Dwell | Keep the contact time stable across the run |
| Pressure | Set enough contact for clean transfer without crushing the board |
| Release | Watch for lifting, drag or patchy fill on solids |
For platen, cylinder and roll-to-roll presses, the same checks apply, but the set-up route will differ. Press-side advice is available through the contact form.
Dies and make ready for process blue
The right die helps the blue finish stay sharp at edges and in small type. Magnesium, copper and brass dies can all be used, depending on the job, the press and the detail needed.
For small logos, fine lines and dense solids, make-ready should keep the die clean, flat and properly registered. A slightly soft stock or a coated surface may need extra adjustment before the first full run.
If the job includes mixed elements, such as blue next to metallic gold or silver, check how the different foils sit together before approval. Compare options with Bright gold or Mirror silver when planning the artwork.
Order and test process blue
Process blue is supplied slit to roll width for trade use, with swatch books and samples available for testing. That makes it easier to match the artwork to the final stock before production starts.
If you need guidance on the finish, the substrate or the press set-up, ask for press-side advice and request a sample through the contact form. For related finishes and more material options, browse the finishes library or return to the products area.
For foil use on plastics, textiles, leather and soft-touch laminate, the same practical approach applies: test first, check transfer, then confirm the result on the actual job stock.
What our Hot Stamping Foil customers say
Verified Google reviews
Also worth a look




Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
