Chrome Mirror specifications
Use these starting points when setting up Chrome Mirror on your press. Check your own stock, then fine-tune the window, pressure and release before production runs.

what chrome mirror is for
Chrome Mirror is a mirror-finish hot stamping foil for sharp, reflective decoration on packaging and printed products. It is commonly used on cosmetics cartons, ABS plaques and gift sleeves, where a bright chrome look is needed on a clean, prepared surface.
The foil is part of the metallic range and is suited to common finishing work where appearance, registration and clean release matter. For substrate checks, see the substrates guide and for press setup notes, use the press notes.
- Use on smooth, well-prepared stock
- Test on your own board, plastic or coated surface first
- Check edge detail, blocking and adhesion before full production
starting points
Use these as a starting setup only. Actual settings depend on your press, die, substrate and artwork coverage.
| Foil family | Temperature | Dwell | Pressure | Release profile | Suits |
|---|---|---|---|---|---|
| Chrome Mirror | 135 to 150°C | Set for a short, even contact time on your own press | Firm pressure | Optical flash | Cosmetics cartons, ABS plaques, gift sleeves |
For platen, cylinder and roll-to-roll work, keep the first trial simple. Change one variable at a time and record the result on the stock you plan to run.
make-ready checks
Before you commit to a run, check the temperature window, dwell, pressure and release on the same material and finish you will use for production. Small differences in coating, laminate or board caliper can change the result.
- Confirm the plate or die is clean and level
- Set enough pressure for even transfer across the image
- Check that the release is clean, without haze or missed areas
- Watch for overheat, crush marks or patchy coverage
If you are working over coated board or soft-touch laminate, start with a conservative setup and test the foil against the actual surface, not a substitute sheet.
how rolls are supplied
Chrome Mirror rolls are slit to the roll width you need for your job. That means the foil is prepared to suit your press and the image area you are running, so you can reduce handling and setup waste.
Ask for swatch books or samples if you need to compare shades, reflectivity or release on different stocks. If you are matching to a particular finishing requirement, speak to the team before you order through the ordering page.
- Slit to width for your press and artwork
- Supplied for trade production use
- Useful for repeat runs and spot testing
test on your stock
The safest way to start is to test on your own substrate, under your own press conditions. Use the same die, the same backing and the same stock build-up you intend to run, then inspect the foil under the same lighting your customer will use.
Check for adhesion, reflection, edge sharpness and any sign of release problems. If the result is not clean, adjust temperature, dwell or pressure in small steps and retest. For ordering questions, sample requests or a practical setup discussion, use the contact form.
For related product information, you can also go back to the Chrome Mirror overview or move to the parent product range at products.
What our Hot Stamping Foil customers say
Verified Google reviews
Also worth a look



Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
