Chrome Mirror
High-reflect mirror foil for sharp metallic finish on cartons, plaques and sleeves. Use the notes below to check substrate, press setup and make-ready before ordering.

what it is
Chrome Mirror is a hot stamping foil for a bright, highly reflective chrome effect where a clean metallic finish matters. It is used on cosmetics cartons, ABS plaques and gift sleeves when the aim is a mirror-like finish rather than a tinted metallic look.
Chrome Mirror sits within the metallic foil range and is chosen for jobs where the visual effect must stand out clearly on shelf and under light. For other metallic directions, see Aurum Gold, Argent Silver and Bronze Cord.
where it suits
Use Chrome Mirror on smooth, stable surfaces where the foil can transfer cleanly and hold a crisp edge. It is commonly specified for:
- Cosmetics cartons
- ABS plaques
- Gift sleeves
- Rigid and semi-rigid packaging surfaces with a controlled print finish
If you are working on coated board, soft-touch laminate, plastics, leather or other specialist stocks, compare the substrate notes in the Chrome Mirror Substrates before setting the job. For packaging projects more broadly, the product families link helps you compare foil types.
press setup
Start with the listed range of 135 to 150°C and test within that window on your actual press, die and substrate combination. Use firm pressure and check that the image is transferring fully without crushing fine detail.
The foil can be run on platen, cylinder and roll-to-roll presses, but the make-ready must match the press type. Keep an eye on dwell, pressure and release profile, then adjust one variable at a time until the transfer is stable. On plated or coated boards, test for clean release and whether the foil holds after folding, handling or overprint.
| Starting point | What to check |
|---|---|
| 135 to 150°C | Temperature window for trial runs |
| Firm pressure | Even contact across the image area |
| Optical flash | Visual effect under light and at angle |
dies and make ready
Good results depend on the right die, clean layout and careful make-ready. Magnesium, copper and brass dies can all be part of a hot stamping setup, but the chosen die must suit the detail level, run length and press format you are using.
Before production, check the image depth, foil coverage on sharp corners, and whether the stock needs extra attention for heat build-up or release. On softer or coated materials, confirm that the foil does not over-burnish or lose definition at the edges. If the job moves across materials, compare the pressure and temperature notes with the relevant Chrome Mirror press notes.
ordering and supply
Chrome Mirror is supplied slit to roll width for the job at hand, with swatch books and samples available for specification work. If you need a wider or narrower roll format, or want to match it against another metallic or specialty finish, use the ordering notes and send the job details through the contact form.
For specification, press questions or stock selection, use Order Chrome Mirror or make a request through the contact form. If you want to compare this finish with other foil families, see Prism Holo, Diffraction Beam, Security Micro and Pigment Solid.
Chrome Mirror

Chrome Mirror specifications
Chrome Mirror technical starting points for temperature, dwell, pressure and release on common substrates, plus slitting and make-ready guidance.
Read more
Chrome Mirror substrates
Practical substrate guidance for Chrome Mirror foil, covering board, laminate, labels, plastics, leather and press-side make-ready checks.
Read more
Chrome Mirror press notes
Press-side notes for Chrome Mirror foil with practical make-ready guidance on heat, dwell, pressure, dies and substrate checks.
Read more
Order Chrome Mirror
Order Chrome Mirror foil rolls with the right substrate, press and width details, plus samples, packing and quote confirmation guidance.
Read moreWhat our Hot Stamping Foil customers say
Verified Google reviews
Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
