Argent Silver

A clean silver finish for packaging and stationery where a bright metallic look is needed. Use the detail pages for substrates, press setup and ordering.

Hot stamping press beside silver, gold and holographic foil rolls and embossed sample cards in a workshop.

What it is

Argent Silver is a bright silver hot stamping foil for jobs that need a sharp metallic finish rather than a printed silver ink look. It suits packaging, labels and stationery where the aim is a clean mirror sheen and good edge definition.

Use it where silver needs to read clearly on coated paper, PET labels and folding cartons. For other foil families, compare Chrome Mirror for a more reflective effect or Pigment Solid for opaque colour work.

This product gives the working overview. The linked detail pages cover specific substrate checks, press notes and how to place an order.

Where it suits

Start with the listed substrates and test from there:

  • Coated paper and board
  • PET labels
  • Folding cartons

For coated board, check surface smoothness, coating quality and whether the board will accept a clean release. For labels, confirm that the face material and topcoat support the intended bond. For cartons, test the artwork area, folding lines and any overprint or varnish around the foil zone.

If the job is for a different material family, see PlasticBond, TextileSheen or LeatherMark.

Press setup

Use Argent Silver as a starting point on platen, cylinder and roll to roll presses, then tune it on press for your stock and tooling. Typical starting temperatures begin around 125 to 140°C, but the right setting depends on the machine, die, substrate and artwork coverage.

Make ready should check four points in sequence: temperature window, dwell, pressure and release. If the foil is under transferring, review heat and dwell first. If edges are soft or fill is uneven, check pressure and surface contact before changing the foil roll.

Press-side advice can be matched to magnesium, copper and brass dies, including die depth, artwork spacing and the release profile needed for clean detail.

Roll supply

Foil is slit to roll width so it can be supplied to suit the press and the job width. That makes it easier to match the foil to the run length and the available tooling without unnecessary waste.

When you request supply, have these basics ready:

  • Press type
  • Substrate
  • Foil width needed
  • Approximate coverage area
  • Whether the job is a short test or a production run

Swatch books and samples are available to help with matching before production. For ordering and practical checks, use Order Argent Silver.

Detail pages

The detail pages below are the quickest way to narrow down the right setup for the job:

PageUse it for
Argent Silver SpecificationsStarting points, appearance and technical notes
Argent Silver SubstratesMaterial checks for paper, board and labels
Argent Silver press notesTemperature, dwell, pressure and release guidance
Order Argent SilverHow to request a roll and confirm the job details

If you need help choosing between silver, gold, bronze or holographic options, compare the family pages under Products.

What our Hot Stamping Foil customers say

Verified Google reviews

Ask about a foil for your job

Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.

Open the contact form