PlasticBond
High-tack foil for plastics, soft-touch laminate and other difficult surfaces. Use the links below for substrates, press notes and ordering details.

What it is
PlasticBond is a high-tack hot stamping foil family made for plastics and other hard-to-bond surfaces. It is used where standard foil struggle to anchor cleanly, especially on PP, PE, PET and ABS.
It is suited to work where a firm, even release and reliable adhesion matter more than decorative effect alone. Typical uses include closures, tubes and appliance badges, along with other plastic parts that need a crisp stamped finish.
For the detailed foil build, move to PlasticBond Specifications. If you are checking compatibility before a run, the substrate list in the PlasticBond Substrates is the best next stop.
Where it suits
This family is aimed at substrates that often need extra surface preparation or tighter press control. Start with clean, stable parts and confirm that the moulded surface or print finish can accept hot stamping without slip or picking.
- PP, PE, PET and ABS parts
- Closures and caps
- Tubes and similar rigid or semi-rigid packs
- Appliance badges and nameplates
- Other plastic components that need high tack adhesion
Where soft-touch laminate or coated surfaces are involved, use the matching make-ready notes and check the surface energy, coating type and handling before production. If the job also touches labels or cartons, compare the foil family with the other product pages under Product families.
Press setup
PlasticBond can be run on platen, cylinder and roll-to-roll presses, provided the foil, die and substrate are matched correctly. The main checks are heat transfer, dwell, pressure and release profile. Those four settings decide whether the foil transfers cleanly or breaks up on the substrate.
Use a sensible starting temperature window and test from there. Plastics vary widely, so the right setting on one part may not suit another, even within the same material group.
| Check | What to look for |
|---|---|
| Temperature window | Start with a test window, then adjust to suit the substrate and press type |
| Dwell | Enough contact time for transfer without overworking the surface |
| Pressure | Firm, even contact across the image or edge detail |
| Release profile | Clean release from the carrier without haze, drag or missing areas |
For more practical run notes, open PlasticBond press notes.
How it is supplied
Foil is slit to roll width so it can match the press route and the job layout. That helps reduce waste and keeps the roll handling suitable for the machine in use.
Swatch books and samples are available for approval and comparison before a run. If you need help choosing between foil families, the product pages for Aurum Gold, Argent Silver and Pigment Solid can help you compare appearance and use.
For supply questions and roll widths, go to Order PlasticBond or use the contact form for a quote request.
Before you order
Before placing a job, confirm the substrate, the press type and the image size. Also check whether the part has mould release residue, coating, texture or curvature that may affect transfer.
- Confirm the plastic type and surface finish
- Check the press, die material and impression area
- Test temperature, dwell, pressure and release profile
- Review substrate notes for plastics and soft-touch laminate
- Ask for samples if the surface is new or difficult
If you need a broader view of the finishing options available, the main hub at Product families is the quickest route through the range. For practical support, use the contact form.
PlasticBond

PlasticBond specifications
PlasticBond specification starting points for common substrates, with practical make-ready guidance, slit-to-width supply and press testing notes.
Read more
PlasticBond substrates
Practical substrate guidance for PlasticBond foil on board, labels, plastics and laminate, with first-test checks for clean transfer.
Read more
PlasticBond press notes
Practical press notes for PlasticBond, covering make-ready, die choice, pressure, heat, dwell and common fixes for hot stamping runs.
Read more
Order PlasticBond
How to order PlasticBond foil rolls, what to include in your enquiry, and how supply, swatches and written confirmation are handled.
Read moreWhat our Hot Stamping Foil customers say
Verified Google reviews
Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
