Aurum Gold

Aurum Gold is a bright metallic foil for clean gold finishes on print and packaging. It is set up for practical testing on common paper, board and laminate work.

Gold hot stamping foil is threaded from a machine across a worktable beside metallic foil rolls, sample cards, and paper boxes.

What Aurum Gold is for

Aurum Gold is a classic gold metallic hot stamping foil for work that needs a clear, familiar gold finish on paper and board. It suits cartons, cards and book covers where the aim is a crisp foil image with good shine.

Use it where the design needs strong visual impact on brands, titles, frames, borders and fine detail. It is also a practical choice for short runs, sampled work and ongoing production on standard press setups.

For related finishes, compare it with Argent Silver, Bronze Cord and Chrome Mirror.

Where it suits

The main starting points for Aurum Gold are paper and board, soft-touch laminate and rigid boxes. Those are the substrates most often checked first when testing adhesion, detail and release.

On coated board, the surface should be checked for clean release and even transfer. On soft-touch laminate, make-ready matters because the surface finish can change how the foil releases and how sharply the image prints.

SubstrateWhat to check
Paper and boardInk set, surface coating, image sharpness and even release
Soft-touch laminateAdhesion, clean edges and the press window needed for transfer
Rigid boxesPressure balance, flatness and consistent coverage across the sheet

Press setup notes

Typical starting temperatures for Aurum Gold are 120 to 135°C, with a medium release. Treat that as a test range only and adjust for the press, substrate and artwork.

Make-ready should check four points together: temperature window, dwell, pressure and release profile. If any one of these is off, the foil can look patchy, soft or over-pressed. For platen, cylinder and roll-to-roll presses, the aim is to match the foil, substrate and die to the same working window.

  • Start with the lower end of the temperature range and step up if needed
  • Check dwell time against image area, stock and press speed
  • Set pressure so the foil transfers cleanly without crushing detail
  • Confirm release on both solid areas and fine lines

Dies and make-ready

Aurum Gold can be run with magnesium, copper and brass dies, depending on the job, the press and the detail required. Fine text, solid areas and borders should all be checked during make-ready so the foil lands cleanly.

Press-side advice is available for setup questions on dies, temperature windows, pressure and release. If the foil is being used on a new substrate, test a small area before moving to full production, especially on coated board or soft-touch laminate.

For broader technical guidance, see Aurum Gold press notes and Aurum Gold specifications.

Ordering and supply

Aurum Gold is supplied slit to roll width for practical press use. That makes it easier to match the foil to the machine and the job format without unnecessary waste.

Swatch books and samples are available to help with colour checking and substrate testing before ordering. If you need a substrate check or press recommendation, use the contact form and include the press type, stock and intended image area.

  • Review the finish and technical details first
  • Check the substrate page for your stock
  • Use the contact form for roll width and job details
  • Ask for a quote through the contact form

See Aurum Gold substrates for material guidance and Order Aurum Gold for the next step.

What our Hot Stamping Foil customers say

Verified Google reviews

Ask about a foil for your job

Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.

Open the contact form