Inkline Process specifications

Use these starting points to test Inkline Process on your own stock and press setup. The foil is supplied slit to the width you need, with practical make-ready guidance.

A hot foil stamping press with gold, silver and holographic foil rolls beside cream sample cards and boxes.

What Inkline Process is for

Inkline Process is a hot stamping foil range for clean, repeatable decorative finishing on common South African print substrates. It suits brand kits, seasonal SKUs and retail labels where a controlled look matters across short and repeat runs.

Use it on cartons, book covers, labels and similar converted work where a foil finish needs to hold detail on coated board and other suitable stocks. For substrate matching and stock-specific notes, see Inkline Process substrates.

The foil can be used on platen, cylinder and roll-to-roll presses, provided the press set-up, die and stock are matched properly. If you need broader foil options for other applications, browse products.

Starting points to test

Use the figures below as starting points only. Always run your own tests on the actual stock, die and press combination before live production.

SpecificationStarting point
Temperature windowTest within the normal hot stamping range for the stock and press, then adjust in small steps.
DwellStart with a short dwell and increase only if the image is not fully releasing.
PressureStart with firm, even pressure across the image area, then reduce or increase as needed.
Release profileCheck for clean release with no picking, ghosting or weak transfer at the edges.

If you need help interpreting test pulls, compare your notes with the practical guidance on inkline process press notes.

How to make ready

On make-ready, check the temperature window first, then confirm dwell and pressure together. A change in one setting can affect the others, so test them as a set rather than in isolation.

  • Confirm the die is clean and mounted flat.
  • Check image size, registration and substrate position before full runs.
  • Watch for uneven transfer on solids, fine detail and edges.
  • Adjust the release profile if the foil is over-releasing or not letting go cleanly.
  • Keep notes for each stock so the next set-up is faster to repeat.

For press-side advice on set-up and troubleshooting, start with the contact form.

How rolls are supplied

Inkline Process rolls are slit to the roll width you need for your job and press format. That helps reduce waste and makes it easier to load the foil for the run in hand.

The supply is intended for trade use, with swatch books, samples and practical handling guidance available for colour and finish selection. If you are setting up a new line or changing stock, ask for samples before you commit your production run.

Roll supply is matched to the job, not padded with unnecessary width. If you need a different foil family for metallic, holographic, security or specialty work, compare options in products.

Before you order

Before ordering, confirm the substrate, press type, die material and image area you intend to run. That lets the foil supplier match the roll slit, finish and starting guidance more accurately to your job.

Inkline Process is suitable for common production work where tight colour control matters, including brand kits and retail labels that need matched batches and tight ΔE control within a trade proofing routine.

For a substrate check, look at substrates. For production notes, use press notes. To place an order or request a quote through the contact form, go to Order Inkline Process or contact.

What our Hot Stamping Foil customers say

Verified Google reviews

Ask about a foil for your job

Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.

Open the contact form