Order TextileSheen
Order TextileSheen with the right substrate, press and roll details up front. Start with swatches and samples, then confirm the order in writing through the contact form.

What to include
When you enquire about TextileSheen, include the substrate, press type, roll width, required length, quantity and the town where the rolls will be used or delivered. If you are unsure about the finish, send the intended application as well, such as apparel labels, caps or soft goods.
It also helps to note whether you are testing a new make-ready or repeating an approved setup. For a clean first response, mention the substrate surface, whether it is coated or uncoated, and any soft-touch laminate, plastic or textile in the stack.
- Substrate and end use
- Press type and format
- Roll width and length
- Quantity needed
- Town or delivery point
- Any sample or swatch reference
Check the press setup
TextileSheen is suited to flexible carrier work and is typically checked on platen, cylinder and roll-to-roll presses. Before production, confirm the temperature window, dwell, pressure and release profile on your press notes, then make a small test run to confirm adhesion and image edge.
For make-ready, keep the die, substrate and foil route consistent from test to run. If you are working with magnesium, copper or brass dies, or with labels and soft goods that move more than rigid stock, ask for press-side advice before ordering the full quantity.
| What to confirm | Why it matters |
|---|---|
| Temperature window | Helps the foil transfer cleanly without overworking the carrier |
| Dwell and pressure | Supports image release on flexible and textured surfaces |
| Release profile | Helps avoid lift, patchiness or unwanted residue |
| Die and make-ready | Supports registration and repeatability on your press |
Samples first
Before you place a final order, ask for swatches or samples so you can check the finish against the actual fabric, label stock or soft goods. This is useful when comparing a brand mark, a decorative panel or a functional mark that must stay legible after handling.
Samples help you see whether the foil suits your substrate and whether the press settings need a small change. If you are printing on textiles or a flexible carrier, test under the same conditions you plan to use for production, including the same die and press format where possible.
You can also ask for a sample if you are comparing a metallic, pigment, holographic or specialty look before you confirm the roll order.
Roll supply and packing
Foil is slit to the roll width you need, so the order can be matched to your job width rather than trimmed on press. If you have a target repeat or machine width, state it clearly in your enquiry so the supply can be prepared accordingly.
Orders are packed for collection or couriered, depending on what you arrange when the quote is confirmed in writing. Keep the pack note, roll width and job reference together so receiving and make-ready stay simple.
- Rolls slit to width
- Packed for collection or courier
- Quote confirmed in writing
- No prices are shown here
Send your enquiry
For TextileSheen, the quickest way to order is to send a clear enquiry through the contact form. Include the application, substrate, press format, roll width, length and quantity, then note whether you want samples or swatches first.
If you also need related guidance, you can review TextileSheen Specifications, TextileSheen Substrates and TextileSheen press notes. If you are comparing foil families for another job, see products for the broader range.
Once your details are received, the order can be checked against the intended use, the press setup and the required roll format before anything is confirmed.
What our Hot Stamping Foil customers say
Verified Google reviews
Also worth a look



Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
