Matte Velvet substrates

Check the stock, the press and the make-ready before you commit to a longer run. Matte Velvet is a low-glare foil family with a soft, velvet feel.

Hot stamping machine with metallic foil rolls and sample cards in black, gold, silver and white on a workshop table.

substrates to test first

Matte Velvet is usually a good starting point on uncoated stock, journals and luxury sleeves, especially where the design needs a soft finish rather than a high shine. For coated board, soft-touch laminate and gloss laminate, run a small test first and check how cleanly the foil releases.

Use extra care on UV varnish, labels, plastics, leather or textiles. These surfaces can behave differently from plain paper and board, so the same heat and pressure settings may not transfer the same way. If the artwork sits on a mixed pack of materials, test each one on its own before you run the set together.

  • Uncoated board and paper
  • Coated board and cartons
  • Soft-touch and gloss laminate
  • UV varnish, labels and certain plastics
  • Leather and textiles where the surface allows

set up the press

For make-ready, start within the known temperature window of 115 to 130°C and adjust to suit the stock, die and press type. Keep dwell, pressure and release under review together, because a change in one can affect the others.

On platen, cylinder and roll-to-roll presses, the same foil can behave differently. A clean, even impression matters more than chasing higher heat. If the transfer looks patchy, check die condition, impression balance and the release profile before changing the foil side of the setup.

CheckWhat to look for
Temperature windowStart in the 115 to 130°C range and test on your actual substrate
DwellLong enough for a clean pull without overcooking the stock
PressureEven contact across the image, especially on solid areas
ReleaseClean release from the carrier without picking or smearing

where it fits in production

This foil family suits work where the finish must stay low glare and tactile, such as journals, sleeves, book covers, cartons and selected labels. It can also be used on some leather goods and soft-touch surfaces where the substrate and adhesive system support hot stamping.

For narrow type, large solids and fine detail, check the die material and image depth before you start. Magnesium, copper and brass dies each behave differently, and the chosen die should match the run length, artwork and press setup. If you are unsure, ask for press-side advice through the contact form.

supply and slit widths

Matte Velvet is supplied slit to roll width to suit production needs. That helps when a job needs a narrower roll for a particular press or image width, or when you want to reduce waste on small-format work.

Swatch books and samples are available so you can check the surface tone and hand feel before you commit to production. If your job moves between different substrates, keep a sample on hand for quick comparison during make-ready and approval.

  • Slit to roll width for production use
  • Swatch books for colour and finish checks
  • Samples for substrate and press trials

related guidance

For more detail on the finish, see Matte Velvet Specifications. For setup notes on heat, pressure and release, go to the Matte Velvet press notes.

If you are planning the next order, use Order Matte Velvet. For broader foil options and related applications, browse Products or the Applications hub.

Before a long run, always test the actual board, laminate or film you will use on press. That is the safest way to confirm transfer quality, especially on coated surfaces and mixed-material jobs.

What our Hot Stamping Foil customers say

Verified Google reviews

Ask about a foil for your job

Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.

Open the contact form