Matte Velvet
A low-glare matte finish with a velvet hand for clean, premium detail on the right stock. Use the press notes and substrate guidance to set up a first test run.

what it is for
Matte Velvet is a soft-touch matte pigment foil made for work where the finish should feel refined without shine. It suits editorial covers, gift wrap, journals and luxury sleeves when the brief calls for a low glare surface and a tactile result.
It suits uncoated stock and other papers that can take a controlled heat transfer. For the right application, it gives a calm, even appearance rather than a metallic look. If you are comparing family options, see Pigment Solid for a more standard pigment finish or Product families for the full range.
For related finishing on different materials, there are dedicated foils for leather, plastics and textiles.
substrates that suit it
This foil is generally used on uncoated stock, journals and luxury sleeves where the paper surface can accept a matte pigment transfer without excessive glare. The key is to check the stock surface, coating level and fibre structure before you commit to a full run.
| Substrate | Fit | What to check |
|---|---|---|
| Uncoated stock | Good starting point | Surface texture, fibre pull and coverage on the first impression |
| Journals | Common use | Area size, panel consistency and handling after stamping |
| Luxury sleeves | Suitable where the look is matte and quiet | Board stiffness, fold lines and artwork placement |
| Coated or soft-touch surfaces | Test first | Release, adhesion and how the coating responds to heat |
For guidance by substrate, go to the Matte Velvet substrates. If your work includes coated board or laminate, ask for press-side advice before setting the run.
press setup notes
Typical starting point for test work is 115 to 130°C. Treat that as a starting range only and adjust to suit the stock, press type, die material and image area. The aim is to get clean release, even transfer and a matte finish without overcooking the sheet.
- Temperature window Start in the lower to middle part of the range and test in small steps.
- Dwell Keep the dwell long enough for transfer, but not so long that the sheet scorches or the image loses definition.
- Pressure Use enough pressure for full contact across the image area, especially on textured stock.
- Release profile Check whether the foil releases cleanly and leaves no patchy edges or drag marks.
- Die and make-ready Confirm the die is level, the makeready is even and the artwork has suitable spacing for the image area.
These checks apply on platen, cylinder and roll-to-roll presses. For more detail, see Matte Velvet press notes.
how it is supplied
Matte Velvet is supplied slit to roll width to suit the job and the press setup. If you need a specific width for a platen, cylinder or roll-to-roll machine, confirm it before ordering so the roll can be matched to the run.
For trade work, swatch books and samples are available so you can compare the look against your stock before production. That is the practical way to check tone, glare and transfer on the actual substrate.
- Rolls slit to width for the application
- Samples for comparison on press stock
- Swatch books for finish selection
- Press-side advice on setup and make-ready
To place an order or request a quotation, use Order Matte Velvet or send the details through the contact form.
related pages
Use these pages to move from product choice to setup and ordering:
- Matte Velvet specifications
- Matte Velvet substrates
- Matte Velvet press notes
- Order Matte Velvet
- Product families
If you are comparing finishes across the range, you can also look at Aurum Gold, Argent Silver, Bronze Cord and Chrome Mirror for other visual effects.
Matte Velvet

Matte Velvet specifications
Matte Velvet specification starting points for South African pressrooms, with temperature, dwell, pressure, release and slit to width supply guidance.
Read more
Matte Velvet substrates
Practical guidance on where Matte Velvet transfers cleanly, what to test first, and how to set up substrates and presses before a longer run.
Read more
Matte Velvet press notes
Practical press notes for Matte Velvet hot stamping foil, with make-ready guidance, die choices, substrate checks and roll supply notes.
Read more
Order Matte Velvet
Order Matte Velvet with practical roll widths, sample-first quoting and packing notes for South African hot stamping buyers.
Read moreWhat our Hot Stamping Foil customers say
Verified Google reviews
Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
