Choosing release profiles
Medium or easy release changes how foil lets go on coated board. The right choice can improve edge quality, fine detail and make-ready.

What release does
Release controls how readily the foil layer separates from the carrier when heat and pressure are applied. On coated board, that choice affects edge sharpness, coverage and how cleanly fine detail lifts from the die.
Medium release gives the foil a firmer pull. Easy release lets the foil transfer with less resistance. Neither is automatically better. The right answer depends on the board coating, the artwork and the press setup.
For a practical starting point, test within your normal foil window and adjust from there. If you are unsure where to begin, ask for press-side advice through the contact form.
When medium release helps
Medium release is often useful when the design has solid areas, narrow lines or mixed detail and coverage. It can help keep the foil standing up on coated board where the surface has enough hold to support a cleaner pull.
It is also worth testing when you want more definition at the edge of type, borders or fine line work. If the board is smooth and well coated, medium release may give a more even finish without lifting too freely.
- Good for detailed logos and fine text
- Useful on coated board with a stable surface
- Often a sensible first test for mixed artwork
On platen, cylinder and roll-to-roll presses, the outcome still depends on die condition, pressure balance and dwell.
When easy release helps
Easy release is usually the better starting point when the artwork is broad, the board coating is sensitive, or the press needs a lighter pull to avoid stress at the edge. It can help reduce drag where the foil should leave cleanly and quickly.
That can be useful for larger solid panels, smoother graphics and jobs where the coating does not need extra resistance from the foil. It may also suit more delicate structures, but it still needs testing with the exact board and die.
- Use when the board coating is touchy or overworked
- Helpful for larger solids and smoother coverage
- Can reduce edge stress on some coated stocks
On some jobs, easy release makes the difference between a clean edge and a heavy, uneven edge.
Set up a fair test
Do not judge release by one pull only. Run a controlled trial with the same foil width, same die, same stock and the same basic press settings, then compare edge quality, transfer and any signs of over-pull.
Watch for the way the foil releases in the image area and at the edges. If the foil looks ragged, you may need to adjust release, dwell or pressure. If it is breaking away too readily, medium release may give more control.
| What to check | What it tells you |
|---|---|
| Edge clarity | Whether the foil is releasing cleanly from the coating |
| Solid area fill | Whether transfer is even across larger areas |
| Fine detail | Whether narrow lines and small text are holding |
| Make-ready | Whether the setup is balanced for the chosen release profile |
Match release to the job
Release is only one part of the setup. It works with temperature, dwell, pressure, die material and the substrate itself. Magnesium, copper and brass dies all behave differently, so the same release profile may not print the same way on every job.
For coated board, start with practical tests rather than assumptions. If the job also involves packaging, labels, leather or soft-touch laminate, the release profile may need to change again. That is where samples and swatch books help before production starts.
For more on related setup choices, see Temperature windows explained, Die prep checklist and Foil on soft-touch laminate. For product details, visit Products or send a request through Contact.
What our Hot Stamping Foil customers say
Verified Google reviews
Also worth a look




Ask about a foil for your job
Send a note through our contact form with the substrate, the press you run (platen, cylinder or roll-to-roll), the finish you are after and the run length, and we will come back with a foil grade, a sample and a quote.
Open the contact form
